AnonymousFox

//proc/self/root/etc/rc1.d/K50kdump

#! /bin/sh
### BEGIN INIT INFO
# Provides: kdump 
# Default-Start:  3 4 5
# Default-Stop: 0 1 6
# Require-Start: $network $local_fs $remote_fs
# Short-Description: start and stop kdump crash recovery service 
# Description:  The kdump init script provides the support necessary for
#		loading a kdump kernel into memory at system bootup time,
#		and for copying away a vmcore at system panic time. 
### END INIT INFO
#  Copyright 2005 Red Hat, Inc.
#
#  Author:  Jeff Moyer <jmoyer@redhat.com>

# Source function library.
. /etc/init.d/functions

KEXEC=/sbin/kexec

# Will be different for ia64, for example.  For now, that architecture isn't
# supported.  Code needs to be added here when we do.
BOOTDIR="/boot"

KDUMP_KERNELVER=""
KDUMP_COMMANDLINE=""
KDUMP_IDE_NOPROBE_COMMANDLINE=""
KEXEC_ARGS=""
KDUMP_CONFIG_FILE="/etc/kdump.conf"
MEM_RESERVED=""
MKDUMPRD_ARGS=""
CLUSTER_CONFIG_FILE="/etc/cluster/cluster.conf"
FENCE_KDUMP_CONFIG="/etc/sysconfig/fence_kdump"
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
#kdump shall be the default dump mode
DEFAULT_DUMP_MODE="kdump"

LOGGER="/usr/bin/logger -p info -t kdump"

standard_kexec_args="-p"

if [ -f /etc/sysconfig/kdump ]; then
	. /etc/sysconfig/kdump
fi

function single_instance_lock()
{
	exec 9>/var/lock/kdump
	flock 9
}

determine_dump_mode()
{
	# Check if firmware-assisted dump is enabled
	# if yes, set the dump mode as fadump and source
	# fadump related functions
	fadump_enabled_sys_node="/sys/kernel/fadump_enabled"
	if [ -f $fadump_enabled_sys_node ]; then
		rc=`cat $fadump_enabled_sys_node`
		if [ $rc -eq 1 ]; then
			echo "kdump: dump mode is fadump"
			DEFAULT_DUMP_MODE="fadump"
			. /etc/init.d/fadump-functions
		fi
	fi
}

# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
# Remove a list of kernel parameters from a given kernel cmdline and print the result.
# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
function remove_cmdline_param()
{
	local cmdline=$1
	shift

for arg in $@; do
		cmdline=`echo $cmdline | \
			 sed -e "s/\b$arg=[^ ]*\b//g" \
			     -e "s/\b$arg\b//g"`
	done
	echo $cmdline
}

function in_xen_pv_guest()
{
	grep -q 'xen-percpu-virq  *timer0' /proc/interrupts
}

function in_xen_hvm_guest()
{
	grep -q "xen" /sys/hypervisor/type >& /dev/null && ! grep -q 'xen-percpu-virq  *timer0' /proc/interrupts
}

function check_xen_hvm_nopv_premkdumprd()
{
	if in_xen_hvm_guest; then
		if grep -q "xen_.*front" /proc/modules; then
			return 1
		fi
	fi
}

function save_kernel_logs()
{
	local _path=$1

mkdir -p $_path

if [ ! -f /sbin/vmcore-dmesg ];then
		$LOGGER "Skipping saving vmcore-dmesg.txt. File /sbin/vmcore-dmesg is not present"
		return;
	fi

echo "kdump: saving vmcore-dmesg.txt to $_path"
	$LOGGER "saving vmcore-dmesg.txt to $_path"
	/sbin/vmcore-dmesg /proc/vmcore > $_path/vmcore-dmesg-incomplete.txt
	if [ $? == 0 ]; then
		mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt
		echo "kdump: saved vmcore-dmesg.txt to $_path"
		$LOGGER "saved vmcore-dmesg.txt to $_path"
	else
		echo "kdump: failed to save vmcore-dmesg.txt to $_path"
		$LOGGER "failed to save vmcore-dmesg.txt to $_path"
	fi

}

#
# This function returns the "initial apicid" of the
# boot cpu (cpu 0) if present.
#
function get_bootcpu_initial_apicid()
{
    awk '                                                       \
	BEGIN { CPU = "-1"; }                                   \
	$1=="processor" && $2==":"      { CPU = $NF; }          \
	CPU=="0" && /initial apicid/    { print $NF; }          \
	'                                                       \
	/proc/cpuinfo
}

#
# This function appends argument "$2=$3" to string ($1) if not already present.
#
function append_cmdline()
{
    local cmdline=$1
    local newstr=${cmdline/$2/""}

# unchanged str implies argument wasn't there
    if [ "$cmdline" == "$newstr" ]; then
        cmdline="${cmdline} ${2}=${3}"
    fi

echo $cmdline
}

# This function fix root=by-path, since we can not parse it in the 2nd kernel
function fix_cmdline_rootdev()
{
	local cmdline=$1
	local rootdev
	local rootuuid
	local is_bypath
	rootdev=$(echo $cmdline | sed 's/^.*root=//' | cut -d" " -f1)
	if [ -n "$rootdev" ]; then
		is_bypath=$(echo $rootdev| grep by-path)
		if [ -n "$is_bypath" ]; then
			cmdline=`remove_cmdline_param "$cmdline" root`
			rootuuid=`findmnt -k -f -n -r -o UUID /`
			if [ -n "$rootuuid" ]; then
				cmdline="$cmdline root=UUID=$rootuuid"
			fi
		fi
	fi
	echo $cmdline
}

# This function performs a series of edits on the command line
function prepare_cmdline()
{
	local cmdline;
	if [ -z "$KDUMP_COMMANDLINE" ]; then
		cmdline=`cat /proc/cmdline`
	else
		cmdline=${KDUMP_COMMANDLINE}
	fi
	cmdline=`remove_cmdline_param "$cmdline" crashkernel mem hugepages hugepagesz`
	cmdline=$(fix_cmdline_rootdev "$cmdline")
	cmdline="${cmdline} ${KDUMP_COMMANDLINE_APPEND}"
	avoid_cdrom_drive
	KDUMP_COMMANDLINE="${KDUMP_COMMANDLINE} ${KDUMP_IDE_NOPROBE_COMMANDLINE}"

local id=`get_bootcpu_initial_apicid`
	if [ ! -z ${id} ] ; then
		cmdline=`append_cmdline "${cmdline}" disable_cpu_apicid ${id}`
	fi

echo $cmdline
}

function save_core()
{
	local kdump_path
	kdump_path=`grep ^path $KDUMP_CONFIG_FILE | cut -d' '  -f2-`
	if [ -z "$kdump_path" ]; then
		coredir="/var/crash/127.0.0.1-`date +"%Y-%m-%d-%H:%M"`"
	else
		coredir="${kdump_path}/127.0.0.1-`date +"%Y-%m-%d-%H:%M"`"
	fi

mkdir -p $coredir
	save_kernel_logs "${coredir}"
	/usr/sbin/makedumpfile -c --message-level 1 -d 31 /proc/vmcore $coredir/vmcore-incomplete
	if [ $? == 0 ]; then
		mv $coredir/vmcore-incomplete $coredir/vmcore
		$LOGGER "saved a vmcore to $coredir"
	else
		$LOGGER "failed to save a vmcore to $coredir"
	fi
}

function check_kdump_config()
{
	local modified_files=""
	local force_rebuild=0
	MKDUMPRD="/sbin/mkdumprd -d -f $MKDUMPRD_ARGS"

force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE | cut -d' '  -f2`
	if [ -n "$force_rebuild" ] && [ "$force_rebuild" -ne 0 ]
	then
                modified_files="force_rebuild"
	fi

if [ -z "$KDUMP_KERNELVER" ]; then
		local running_kernel=`uname -r`

kdump_kver=`echo $running_kernel | sed 's/smp//g'`
	else
		kdump_kver=$KDUMP_KERNELVER
	fi

kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"
	kdump_initrd="${KDUMP_BOOTDIR}/initrd-${kdump_kver}kdump.img"

if [ ! -f $kdump_kernel ]; then
		echo -n "No kdump kernel image found."; warning; echo
		echo "Tried to locate ${kdump_kernel}"
		return 0
	fi

if [ ! -f $kdump_initrd ]; then
		echo  -n "No kdump initial ramdisk found."; warning; echo
		if ! check_xen_hvm_nopv_premkdumprd; then
			echo "hvm guest with pv drivers is not supported."
			exit 1
		fi

echo "Rebuilding $kdump_initrd"
		$MKDUMPRD $kdump_initrd $kdump_kver
		if [ $? != 0 ]; then
			echo "Failed to run mkdumprd"
			$LOGGER "mkdumprd: failed to make kdump initrd"
			rm -f $kdump_initrd
			exit 1
		fi
		return 0
	fi

if [ -z "$modified_files" ]
	then
		#check to see if config file or kdump post has been modified
		#since last build of the image file
		image_time=`stat -c "%Y" $kdump_initrd`
		EXTRA_FILES=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\  -f2`
		CHECK_FILE=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\  -f2`
		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"
		CHECK_FILE=`grep ^extra_modules $KDUMP_CONFIG_FILE | cut -d\  -f2-`
		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"
		CHECK_FILE=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\  -f2-`
		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"
		FORCE_REBUILD=`grep ^extra_modules $KDUMP_CONFIG_FILE`
		files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_FILES"

# changes in CLUSTER_CONFIG_FILE should be monitored only if fence_kdump
		# is not configured using fence_kdump_nodes option in /etc/kdump.conf
		# and fence_kdump is configured in Pacemaker cluster
		if ! grep -q ^fence_kdump_nodes /etc/kdump.conf \
			&& [ -f "$CLUSTER_CONFIG_FILE" ] \
			&& grep -q fence_kdump "$CLUSTER_CONFIG_FILE"
		then
		    files="$files $CLUSTER_CONFIG_FILE"
		    if [ -f "$FENCE_KDUMP_CONFIG" ]; then
			files="$files $FENCE_KDUMP_CONFIG"
		    fi
		fi

for file in $files; do
			time_stamp=0
			if [ -f "$file" ]; then
				time_stamp=`stat -c "%Y" $file`
			else
				modified_files="$modified_files $file"
				continue
			fi
			if [ "$time_stamp" -gt "$image_time" ]; then
				modified_files="$modified_files $file"
			fi
		done
	fi

if [ -n "$FORCE_REBUILD" -a "$modified_files"!=" " ]
        then
                modified_files="force_rebuild"
        fi

if [ -n "$modified_files" -a "$modified_files"!=" " ]; then
                if [ "$modified_files" != "force_rebuild" ]
                then
                        echo "Detected change(s) the following file(s):"
                        echo -n "  "; echo "$modified_files" | sed 's/\s/\n  /g'
                fi

if ! check_xen_hvm_nopv_premkdumprd; then
			echo "hvm guest with pv drivers is not supported."
			exit 1
		fi

echo "Rebuilding $kdump_initrd"
		$MKDUMPRD $kdump_initrd $kdump_kver
                if [ $? != 0 ]; then
                        echo "Failed to run mkdumprd"
                        $LOGGER "mkdumprd: failed to make kdump initrd"
			rm -f $kdump_initrd
                        return 1
                fi
        fi

#double check the xen_*front modules are not included for xen hvm
	if in_xen_hvm_guest; then
		if $(lsinitrd $kdump_initrd|grep -q "xen_.*front.ko"); then
			echo "Found xen pv drivers in kdump initrd"
			exit 1
		fi
	fi
        return 0
}

function check_config()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		check_fadump_config
	else
		check_kdump_config
	fi

return $?
}

# This function check iomem and determines if we have more than
# 4GB of ram available. Returns 1 if we do, 0 if we dont
function need_64bit_headers()
{
    return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \
    print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`
}

function avoid_cdrom_drive()
{
	local DRIVE=""
	local MEDIA=""
	local IDE_DRIVES=(`echo hd{a,b,c,d}`)
	local COUNTER="0"

for DRIVE in ${IDE_DRIVES[@]}
	do
		if ! $(echo "$KDUMP_COMMANDLINE" |grep -q "$DRIVE=");then
			if [ -f /proc/ide/$DRIVE/media ];then
				MEDIA=$(cat /proc/ide/$DRIVE/media)
				if [ x"$MEDIA" == x"cdrom" ]; then
					KDUMP_IDE_NOPROBE_COMMANDLINE="$KDUMP_IDE_NOPROBE_COMMANDLINE $DRIVE=cdrom"
					COUNTER=$(($COUNTER+1))
				fi
			fi
		else
			KDUMP_IDE_NOPROBE_COMMANDLINE="$KDUMP_IDE_NOPROBE_COMMANDLINE $DRIVE=noprobe"
		fi
	done
	# We don't find cdrom drive.
	if [ $COUNTER -eq 0 ]; then
		KDUMP_IDE_NOPROBE_COMMANDLINE=""
	fi
}

function check_kernel_parameter()
{
	if [ -z "$KDUMP_COMMANDLINE" ]
	then
		KDUMP_COMMANDLINE=`cat /proc/cmdline`
	fi

MEM_RESERVED=`cat /sys/kernel/kexec_crash_size`

if [ $MEM_RESERVED -eq 0 ]
	then
		return 1
	else
		return 0
	fi
}

# Load the kdump kernel specified in /etc/sysconfig/kdump
# If none is specified, try to load a kdump kernel with the same version
# as the currently running kernel.
function load_kdump()
{
	ARCH=`uname -m`

# Get the approx amount of ram the kernel is using in Kb
	KMEMINUSE=`awk '/Slab:.*/ {print $2}' /proc/meminfo`
	# Convert the reserved ram amount to Kb
	MEM_RESERVED=`dc -e"$MEM_RESERVED 1024 / p"`

# Take 70% of the reserved value rounding up to the nearest integer
	MEM_RESERVED=`dc -e"$MEM_RESERVED .7 * 10 * 10 / p"`

#On x86, we are using nr_cpus=1, so the following check is not necessary.
	if [ "$ARCH" != "i686" -a "$ARCH" != "i386" -a "$ARCH" != "x86_64" ]
	then
		#Check if the KMEMINUSE is greater than MEM_RESERVED
		# This indicates that the currently runnign kernel is using
		# 70% of the amount of memory that we have reserved for kdump
		# we should issue a warning here indicating that the user may
		# want to increase the amount of reserved ram on the system
		if [ $KMEMINUSE -gt $MEM_RESERVED ]
		then
			echo -n "Your running kernel is using more than 70% of the amount of space you reserved for kdump, you should consider increasing your crashkernel reservation"
			warning
			echo
		fi 
	fi

if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]
	then

need_64bit_headers
		if [ $? == 1 ]
		then
			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf32-core-headers`
			if [ -n "$FOUND_ELF_ARGS" ]
			then
				echo -n "Warning: elf32-core-headers overrides correct elf64 setting"
				warning
				echo
			else	
				KEXEC_ARGS="$KEXEC_ARGS --elf64-core-headers"
			fi
		else
			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf64-core-headers`
			if [ -z "$FOUND_ELF_ARGS" ]
			then
				KEXEC_ARGS="$KEXEC_ARGS --elf32-core-headers"
			fi
		fi
	fi

if [ -f /sys/firmware/efi/systab ]
	then
		if grep -q '^ACPI20=' /sys/firmware/efi/systab
		then
			acpi_addr=$(awk -F'=' '/^ACPI20=/ {print $2}' /sys/firmware/efi/systab)
		else
			acpi_addr=$(awk -F'=' '/^ACPI=/ {print $2}' /sys/firmware/efi/systab)
		fi
		KDUMP_COMMANDLINE="$KDUMP_COMMANDLINE noefi acpi_rsdp=$acpi_addr"

smbios_addr=$(awk -F'=' '/^SMBIOS=/ {print $2}' /sys/firmware/efi/systab)
		if [ -n "$smbios_addr" ]; then
			KDUMP_COMMANDLINE="$KDUMP_COMMANDLINE efi_smbios_addr=$smbios_addr"
		fi
	fi

if echo "$KDUMP_COMMANDLINE_APPEND" | grep -q nr_cpus;
	then
		ver=`uname -r`
		maj=`echo $ver | cut -d'-' -f1`
		min=`echo $ver | cut -d'-' -f2`
		min=${min%%.*}
		if [ "$maj" = "2.6.32" ] && [ $min -lt 171 ]
		then
			echo "Your kernel is old, please use maxcpus=1 instead of nr_cpus=1"
			return 1
		fi
	fi

KDUMP_COMMANDLINE=`prepare_cmdline`

if ! grep -q /sys/kernel/debug /proc/mounts;
	then
		mount -t debugfs debug /sys/kernel/debug
		MNTDEBUG=/sys/kernel/debug
	fi

$KEXEC $KEXEC_ARGS $standard_kexec_args \
		--command-line="$KDUMP_COMMANDLINE" \
		--initrd=$kdump_initrd $kdump_kernel 2>/dev/null
	if [ $? == 0 ]; then
		umount $MNTDEBUG 2>/dev/null
		$LOGGER "kexec: loaded kdump kernel"
		return 0
	else
		umount $MNTDEBUG 2>/dev/null
		$LOGGER "kexec: failed to load kdump kernel"
		return 1
	fi
}

function propagate_ssh_key()
{
	while read config_opt config_val; do
		case "$config_opt" in
		sshkey)
			SSH_KEY_LOCATION="$config_val"
			;;
		*)
			;;
		esac 
	done < $KDUMP_CONFIG_FILE

local KEYFILE=$SSH_KEY_LOCATION
	local errmsg="Failed to propagate ssh key"

#make sure they've configured kdump.conf for ssh dumps
	local SSH_TARGET=`awk '/^\ *net.*@.*$/ {print $0}' $KDUMP_CONFIG_FILE`
	[ -z "$SSH_TARGET" ] && SSH_TARGET=`awk '/^\ *ssh.*@.*$/ {print $0}' $KDUMP_CONFIG_FILE`
	if [ -z "$SSH_TARGET" ]; then
		echo "No ssh config specified in $KDUMP_CONFIG_FILE.  Can't propagate"
		$LOGGER "$errmsg, no ssh config specified in $KDUMP_CONFIG_FILE"
		exit 1
	fi

#Check to see if we already created key, if not, create it.
	if [ -f $KEYFILE ]; then
		echo "Using existing keys..."
	else
		echo -n "Generating new ssh keys... "
		/usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null
		echo "done."
	fi

#now find the target ssh user and server to contact.
	SSH_USER=`echo $SSH_TARGET | cut -d\  -f2 | cut -d@ -f1`
	SSH_SERVER=`echo $SSH_TARGET | sed -e's/$.*@$$.*$$/\2/'`
 
	#now send the found key to the found server
	ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER &>/dev/null
	RET=$?
	if [ $RET == 0 ]; then
		echo $KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER
		$LOGGER "propagated ssh key (ssh server: $SSH_SERVER)"
		return 0
	else
		echo $KEYFILE failed in transfer to $SSH_SERVER
		$LOGGER "$errmsg, unable to transfer $KEYFILE to $SSH_SERVER"
		exit 1
	fi
		
}

function status()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		check_current_fadump_status
		return $?
	fi

if [ ! -e /sys/kernel/kexec_crash_loaded ]
	then
		return 2 
	fi

if in_xen_pv_guest; then
		return 2
	elif in_xen_hvm_guest && ! grep -q -e xen_emul_unplug=never -e xen_emul_unplug=unnecessary /proc/cmdline; then
		echo 'kdump only supported on xen hvm guests booted with xen_emul_unplug=never or xen_emul_unplug=unnecessary'
		return 2
	fi

rc=`cat /sys/kernel/kexec_crash_loaded`
	if [ $rc == 1 ]; then
		return 0
	else
		return 1
	fi
}

get_save_path() {
	local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
	if [ -z "$_save_path" ]; then
		_save_path="/var/crash"
	fi

echo $_save_path
}

is_dump_target_configured() {
    local _target

_target=$(egrep "^ext[234]|^xfs|^btrfs|^raw|^ssh|^nfs|^nfs4|^net" /etc/kdump.conf)

[ -n "$_target" ]
}

local_fs_dump_target()
{
	local _target

_target=$(egrep "^ext[234]|^xfs|^btrfs" /etc/kdump.conf)
	if [ $? -eq 0 ]; then
		echo $_target|awk '{print $2}'
	fi
}

path_to_be_relabeled() {
	local _path _target _mnt="/" _rmnt

if is_dump_target_configured; then
		_target=$(local_fs_dump_target)
		if [[ -n "$_target" ]]; then
			_mnt=$(findmnt -k -f -n -r -o TARGET $_target)
			if [ -z "$_mnt" ]; then
				return
			fi
		else
			return
		fi
	fi

_path=$(get_save_path)
	# if $_path is masked by other mount, we will not relabel it.
	# one exception is ! is_dump_target_configure && "$_rmnt" != "$_mnt"
	# for this exception see mkdumprd code about [ -z "$USING_METHOD" ]
	_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')
	if [[ "$_rmnt" == "$_mnt" ]] || ! is_dump_target_configured; then
		echo $_mnt/$_path
	fi
}

selinux_relabel()
{
	local _path _i _attr

_path=$(path_to_be_relabeled)
	if [ -z "$_path" ] || ! [ -d "$_path" ] ; then
		return
	fi

for _i in $(find $_path); do
		_attr=$(getfattr -m "security.selinux" $_i 2>/dev/null)
		if [ -z "$_attr" ]; then
			restorecon $_i;
		fi
	done
}

start_dump()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		start_fadump
	else
		load_kdump
	fi

return $?
}

# Notes about xen support:
# pv guests are not supported
# hvm guests are supported only when you ensure below items:
# 1. Boot guests with either xen_emul_unplug=never or
#    xen_emul_unplug=unnecessary.
# 2. While recreating kdump initrd xen_netfront and xen_blkfront modules
#    are not loaded
function start()
{
	if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then
		selinux_relabel
	fi
	save_raw
	if [ $? -ne 0 ]; then
		echo -n "Starting kdump:"; failure; echo
		$LOGGER "failed to start up"
		return 1
	fi
	status 
	rc=$?
	if [ $rc == 2 ]; then
		echo -n "Kdump is not supported on this kernel"; failure; echo
		return 1;
	else
		if [ $rc == 0 ]; then
			echo -n "Kdump already running"; success; echo
			return 0
		fi
	fi

# Kernel parameter check is not required for fadump as 'fadump=on'
	# should have already been passed if dump mode is fadump
	if [ $DEFAULT_DUMP_MODE != "fadump" ]; then
		check_kernel_parameter
		if [ $? != 0 ]; then
			echo -n "Starting kdump:"; failure; echo
			$LOGGER "No crashkernel parameter specified for running kernel"
			return 1
		fi
	fi

check_config
	if [ $? != 0 ]; then
		echo -n "Starting kdump:"; failure; echo
		$LOGGER "failed to start up, config file incorrect"
		return 1
	fi

start_dump
	if [ $? != 0 ]; then
		echo -n "Starting kdump:"; failure; echo
		$LOGGER "failed to start up"
		return 1
	fi

echo -n "Starting kdump:"; success; echo
	$LOGGER "started up"
}

stop_kdump()
{
	$KEXEC -p -u 2>/dev/null
	if [ $? != 0 ]; then
		$LOGGER "kexec: failed to unload kdump kernel"
		return 1
	fi

$LOGGER "kexec: unloaded kdump kernel"
	return 0
}

function stop()
{
	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
		stop_fadump
	else
		stop_kdump
	fi

if [ $? != 0 ]; then
		echo -n "Stopping kdump:"; failure; echo
		$LOGGER "failed to stop"
		return 1
	fi

echo -n "Stopping kdump:"; success; echo
	$LOGGER "stopped"
	return 0
}

# Other kdump init instances will block in queue, until this one exits.
single_instance_lock

# Determine if the dump mode is kdump or fadump
determine_dump_mode

case "$1" in
  start)
	if [ $DEFAULT_DUMP_MODE == "fadump" ] && is_fadump_save_path
	then
		# fadump: second boot after crash, save vmcore
		save_fadump_core
		if [ $? -eq 0 ]; then
			reboot
		else
			save_fadump_core_on_error
			handle_fadump_default_action
		fi
	elif [ -s /proc/vmcore ]; then
		save_core
		reboot
	else
		start
	fi
	;;
  stop)
	stop
	;;
  status)
	EXIT_CODE=0
	status
	case "$?" in
	0)
		echo "Kdump is operational"
		EXIT_CODE=0
		;;
	1)
		echo "Kdump is not operational"
		EXIT_CODE=3
		;;
	2)
		echo "Kdump is unsupported on this kernel"
		EXIT_CODE=3
		;;
	esac
	exit $EXIT_CODE
	;;
  restart)
	stop
	start
	;;
  condrestart)
        EXIT_CODE=1
        status
        case "$?" in
        0)
                stop
                start
                EXIT_CODE=0
        ;;
        esac
        exit $EXIT_CODE
	;;
  propagate)
	propagate_ssh_key
	;;
  *)
	echo $"Usage: $0 {start|stop|status|restart|propagate}"
	exit 1
esac

exit $?