AnonymousFox

//usr/local/ssl/share/perl5/pod/perlfaq4.pod

=head1 NAME

perlfaq4 - Data Manipulation

=head1 DESCRIPTION

This section of the FAQ answers questions related to manipulating
numbers, dates, strings, arrays, hashes, and miscellaneous data issues.

=head1 Data: Numbers

=head2 Why am I getting long decimals (eg, 19.9499999999999) instead of the numbers I should be getting (eg, 19.95)?

Internally, your computer represents floating-point numbers in binary.
Digital (as in powers of two) computers cannot store all numbers
exactly.  Some real numbers lose precision in the process.  This is a
problem with how computers store numbers and affects all computer
languages, not just Perl.

L<perlnumber> shows the gory details of number representations and
conversions.

To limit the number of decimal places in your numbers, you can use the
printf or sprintf function.  See the L<"Floating Point
Arithmetic"|perlop> for more details.

printf "%.2f", 10/3;

my $number = sprintf "%.2f", 10/3;

=head2 Why is int() broken?

Your C<int()> is most probably working just fine.  It's the numbers that
aren't quite what you think.

First, see the answer to "Why am I getting long decimals
(eg, 19.9499999999999) instead of the numbers I should be getting
(eg, 19.95)?".

For example, this

print int(0.6/0.2-2), "\n";

will in most computers print 0, not 1, because even such simple
numbers as 0.6 and 0.2 cannot be presented exactly by floating-point
numbers.  What you think in the above as 'three' is really more like
2.9999999999999995559.

=head2 Why isn't my octal data interpreted correctly?

(contributed by brian d foy)

You're probably trying to convert a string to a number, which Perl only
converts as a decimal number. When Perl converts a string to a number, it
ignores leading spaces and zeroes, then assumes the rest of the digits
are in base 10:

my $string = '0644';

print $string + 0;  # prints 644

print $string + 44; # prints 688, certainly not octal!

This problem usually involves one of the Perl built-ins that has the
same name a unix command that uses octal numbers as arguments on the
command line. In this example, C<chmod> on the command line knows that
its first argument is octal because that's what it does:

%prompt> chmod 644 file

If you want to use the same literal digits (644) in Perl, you have to tell
Perl to treat them as octal numbers either by prefixing the digits with
a C<0> or using C<oct>:

chmod(     0644, $file);   # right, has leading zero
	chmod( oct(644), $file );  # also correct

The problem comes in when you take your numbers from something that Perl
thinks is a string, such as a command line argument in C<@ARGV>:

chmod( $ARGV[0],      $file);   # wrong, even if "0644"

chmod( oct($ARGV[0]), $file );  # correct, treat string as octal

You can always check the value you're using by printing it in octal
notation to ensure it matches what you think it should be. Print it
in octal  and decimal format:

printf "0%o %d", $number, $number;

=head2 Does Perl have a round() function?  What about ceil() and floor()?  Trig functions?

Remember that C<int()> merely truncates toward 0.  For rounding to a
certain number of digits, C<sprintf()> or C<printf()> is usually the
easiest route.

printf("%.3f", 3.1415926535);   # prints 3.142

The C<POSIX> module (part of the standard Perl distribution)
implements C<ceil()>, C<floor()>, and a number of other mathematical
and trigonometric functions.

use POSIX;
	$ceil   = ceil(3.5);   # 4
	$floor  = floor(3.5);  # 3

In 5.000 to 5.003 perls, trigonometry was done in the C<Math::Complex>
module.  With 5.004, the C<Math::Trig> module (part of the standard Perl
distribution) implements the trigonometric functions. Internally it
uses the C<Math::Complex> module and some functions can break out from
the real axis into the complex plane, for example the inverse sine of
2.

Rounding in financial applications can have serious implications, and
the rounding method used should be specified precisely.  In these
cases, it probably pays not to trust whichever system rounding is
being used by Perl, but to instead implement the rounding function you
need yourself.

To see why, notice how you'll still have an issue on half-way-point
alternation:

for ($i = 0; $i < 1.01; $i += 0.05) { printf "%.1f ",$i}

0.0 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.7
	0.8 0.8 0.9 0.9 1.0 1.0

Don't blame Perl.  It's the same as in C.  IEEE says we have to do
this. Perl numbers whose absolute values are integers under 2**31 (on
32 bit machines) will work pretty much like mathematical integers.
Other numbers are not guaranteed.

=head2 How do I convert between numeric representations/bases/radixes?

As always with Perl there is more than one way to do it.  Below are a
few examples of approaches to making common conversions between number
representations.  This is intended to be representational rather than
exhaustive.

Some of the examples later in L<perlfaq4> use the C<Bit::Vector>
module from CPAN. The reason you might choose C<Bit::Vector> over the
perl built in functions is that it works with numbers of ANY size,
that it is optimized for speed on some operations, and for at least
some programmers the notation might be familiar.

=over 4

=item How do I convert hexadecimal into decimal

Using perl's built in conversion of C<0x> notation:

$dec = 0xDEADBEEF;

Using the C<hex> function:

$dec = hex("DEADBEEF");

Using C<pack>:

$dec = unpack("N", pack("H8", substr("0" x 8 . "DEADBEEF", -8)));

Using the CPAN module C<Bit::Vector>:

use Bit::Vector;
	$vec = Bit::Vector->new_Hex(32, "DEADBEEF");
	$dec = $vec->to_Dec();

=item How do I convert from decimal to hexadecimal

Using C<sprintf>:

$hex = sprintf("%X", 3735928559); # upper case A-F
	$hex = sprintf("%x", 3735928559); # lower case a-f

Using C<unpack>:

$hex = unpack("H*", pack("N", 3735928559));

Using C<Bit::Vector>:

use Bit::Vector;
	$vec = Bit::Vector->new_Dec(32, -559038737);
	$hex = $vec->to_Hex();

And C<Bit::Vector> supports odd bit counts:

use Bit::Vector;
	$vec = Bit::Vector->new_Dec(33, 3735928559);
	$vec->Resize(32); # suppress leading 0 if unwanted
	$hex = $vec->to_Hex();

=item How do I convert from octal to decimal

Using Perl's built in conversion of numbers with leading zeros:

$dec = 033653337357; # note the leading 0!

Using the C<oct> function:

$dec = oct("33653337357");

Using C<Bit::Vector>:

use Bit::Vector;
	$vec = Bit::Vector->new(32);
	$vec->Chunk_List_Store(3, split(//, reverse "33653337357"));
	$dec = $vec->to_Dec();

=item How do I convert from decimal to octal

Using C<sprintf>:

$oct = sprintf("%o", 3735928559);

Using C<Bit::Vector>:

use Bit::Vector;
	$vec = Bit::Vector->new_Dec(32, -559038737);
	$oct = reverse join('', $vec->Chunk_List_Read(3));

=item How do I convert from binary to decimal

Perl 5.6 lets you write binary numbers directly with
the C<0b> notation:

$number = 0b10110110;

Using C<oct>:

my $input = "10110110";
	$decimal = oct( "0b$input" );

Using C<pack> and C<ord>:

$decimal = ord(pack('B8', '10110110'));

Using C<pack> and C<unpack> for larger strings:

$int = unpack("N", pack("B32",
	substr("0" x 32 . "11110101011011011111011101111", -32)));
	$dec = sprintf("%d", $int);

# substr() is used to left pad a 32 character string with zeros.

Using C<Bit::Vector>:

$vec = Bit::Vector->new_Bin(32, "11011110101011011011111011101111");
	$dec = $vec->to_Dec();

=item How do I convert from decimal to binary

Using C<sprintf> (perl 5.6+):

$bin = sprintf("%b", 3735928559);

Using C<unpack>:

$bin = unpack("B*", pack("N", 3735928559));

Using C<Bit::Vector>:

use Bit::Vector;
	$vec = Bit::Vector->new_Dec(32, -559038737);
	$bin = $vec->to_Bin();

The remaining transformations (e.g. hex -> oct, bin -> hex, etc.)
are left as an exercise to the inclined reader.

=back

=head2 Why doesn't & work the way I want it to?

The behavior of binary arithmetic operators depends on whether they're
used on numbers or strings.  The operators treat a string as a series
of bits and work with that (the string C<"3"> is the bit pattern
C<00110011>).  The operators work with the binary form of a number
(the number C<3> is treated as the bit pattern C<00000011>).

So, saying C<11 & 3> performs the "and" operation on numbers (yielding
C<3>).  Saying C<"11" & "3"> performs the "and" operation on strings
(yielding C<"1">).

Most problems with C<&> and C<|> arise because the programmer thinks
they have a number but really it's a string.  The rest arise because
the programmer says:

if ("\020\020" & "\101\101") {
		# ...
		}

but a string consisting of two null bytes (the result of C<"\020\020"
& "\101\101">) is not a false value in Perl.  You need:

if ( ("\020\020" & "\101\101") !~ /[^\000]/) {
		# ...
		}

=head2 How do I multiply matrices?

Use the Math::Matrix or Math::MatrixReal modules (available from CPAN)
or the PDL extension (also available from CPAN).

=head2 How do I perform an operation on a series of integers?

To call a function on each element in an array, and collect the
results, use:

@results = map { my_func($_) } @array;

For example:

@triple = map { 3 * $_ } @single;

To call a function on each element of an array, but ignore the
results:

foreach $iterator (@array) {
		some_func($iterator);
		}

To call a function on each integer in a (small) range, you B<can> use:

@results = map { some_func($_) } (5 .. 25);

but you should be aware that the C<..> operator creates an array of
all integers in the range.  This can take a lot of memory for large
ranges.  Instead use:

@results = ();
	for ($i=5; $i < 500_005; $i++) {
		push(@results, some_func($i));
		}

This situation has been fixed in Perl5.005. Use of C<..> in a C<for>
loop will iterate over the range, without creating the entire range.

for my $i (5 .. 500_005) {
		push(@results, some_func($i));
		}

will not create a list of 500,000 integers.

=head2 How can I output Roman numerals?

Get the http://www.cpan.org/modules/by-module/Roman module.

=head2 Why aren't my random numbers random?

If you're using a version of Perl before 5.004, you must call C<srand>
once at the start of your program to seed the random number generator.

BEGIN { srand() if $] < 5.004 }

5.004 and later automatically call C<srand> at the beginning.  Don't
call C<srand> more than once--you make your numbers less random,
rather than more.

Computers are good at being predictable and bad at being random
(despite appearances caused by bugs in your programs :-).  see the
F<random> article in the "Far More Than You Ever Wanted To Know"
collection in http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz , courtesy
of Tom Phoenix, talks more about this.  John von Neumann said, "Anyone
who attempts to generate random numbers by deterministic means is, of
course, living in a state of sin."

If you want numbers that are more random than C<rand> with C<srand>
provides, you should also check out the C<Math::TrulyRandom> module from
CPAN.  It uses the imperfections in your system's timer to generate
random numbers, but this takes quite a while.  If you want a better
pseudorandom generator than comes with your operating system, look at
"Numerical Recipes in C" at http://www.nr.com/ .

=head2 How do I get a random number between X and Y?

To get a random number between two values, you can use the C<rand()>
built-in to get a random number between 0 and 1. From there, you shift
that into the range that you want.

C<rand($x)> returns a number such that C<< 0 <= rand($x) < $x >>. Thus
what you want to have perl figure out is a random number in the range
from 0 to the difference between your I<X> and I<Y>.

That is, to get a number between 10 and 15, inclusive, you want a
random number between 0 and 5 that you can then add to 10.

my $number = 10 + int rand( 15-10+1 ); # ( 10,11,12,13,14, or 15 )

Hence you derive the following simple function to abstract
that. It selects a random integer between the two given
integers (inclusive), For example: C<random_int_between(50,120)>.

sub random_int_between {
		my($min, $max) = @_;
		# Assumes that the two arguments are integers themselves!
		return $min if $min == $max;
		($min, $max) = ($max, $min)  if  $min > $max;
		return $min + int rand(1 + $max - $min);
		}

=head1 Data: Dates

=head2 How do I find the day or week of the year?

The localtime function returns the day of the year.  Without an
argument localtime uses the current time.

$day_of_year = (localtime)[7];

The C<POSIX> module can also format a date as the day of the year or
week of the year.

use POSIX qw/strftime/;
	my $day_of_year  = strftime "%j", localtime;
	my $week_of_year = strftime "%W", localtime;

To get the day of year for any date, use C<POSIX>'s C<mktime> to get
a time in epoch seconds for the argument to localtime.

use POSIX qw/mktime strftime/;
	my $week_of_year = strftime "%W",
		localtime( mktime( 0, 0, 0, 18, 11, 87 ) );

The C<Date::Calc> module provides two functions to calculate these.

use Date::Calc;
	my $day_of_year  = Day_of_Year(  1987, 12, 18 );
	my $week_of_year = Week_of_Year( 1987, 12, 18 );

=head2 How do I find the current century or millennium?

Use the following simple functions:

sub get_century    {
		return int((((localtime(shift || time))[5] + 1999))/100);
		}

sub get_millennium {
		return 1+int((((localtime(shift || time))[5] + 1899))/1000);
		}

On some systems, the C<POSIX> module's C<strftime()> function has been
extended in a non-standard way to use a C<%C> format, which they
sometimes claim is the "century". It isn't, because on most such
systems, this is only the first two digits of the four-digit year, and
thus cannot be used to reliably determine the current century or
millennium.

=head2 How can I compare two dates and find the difference?

(contributed by brian d foy)

You could just store all your dates as a number and then subtract.
Life isn't always that simple though. If you want to work with
formatted dates, the C<Date::Manip>, C<Date::Calc>, or C<DateTime>
modules can help you.

=head2 How can I take a string and turn it into epoch seconds?

If it's a regular enough string that it always has the same format,
you can split it up and pass the parts to C<timelocal> in the standard
C<Time::Local> module.  Otherwise, you should look into the C<Date::Calc>
and C<Date::Manip> modules from CPAN.

=head2 How can I find the Julian Day?

(contributed by brian d foy and Dave Cross)

You can use the C<Time::JulianDay> module available on CPAN.  Ensure
that you really want to find a Julian day, though, as many people have
different ideas about Julian days.  See
http://www.hermetic.ch/cal_stud/jdn.htm for instance.

You can also try the C<DateTime> module, which can convert a date/time
to a Julian Day.

$ perl -MDateTime -le'print DateTime->today->jd'
	2453401.5

Or the modified Julian Day

$ perl -MDateTime -le'print DateTime->today->mjd'
	53401

Or even the day of the year (which is what some people think of as a
Julian day)

$ perl -MDateTime -le'print DateTime->today->doy'
	31

=head2 How do I find yesterday's date?
X<date> X<yesterday> X<DateTime> X<Date::Calc> X<Time::Local>
X<daylight saving time> X<day> X<Today_and_Now> X<localtime>
X<timelocal>

(contributed by brian d foy)

Use one of the Date modules. The C<DateTime> module makes it simple, and
give you the same time of day, only the day before.

use DateTime;

my $yesterday = DateTime->now->subtract( days => 1 );

print "Yesterday was $yesterday\n";

You can also use the C<Date::Calc> module using its C<Today_and_Now>
function.

use Date::Calc qw( Today_and_Now Add_Delta_DHMS );

my @date_time = Add_Delta_DHMS( Today_and_Now(), -1, 0, 0, 0 );

print "@date_time\n";

Most people try to use the time rather than the calendar to figure out
dates, but that assumes that days are twenty-four hours each.  For
most people, there are two days a year when they aren't: the switch to
and from summer time throws this off. Let the modules do the work.

If you absolutely must do it yourself (or can't use one of the
modules), here's a solution using C<Time::Local>, which comes with
Perl:

# contributed by Gunnar Hjalmarsson
	 use Time::Local;
	 my $today = timelocal 0, 0, 12, ( localtime )[3..5];
	 my ($d, $m, $y) = ( localtime $today-86400 )[3..5];
	 printf "Yesterday: %d-%02d-%02d\n", $y+1900, $m+1, $d;

In this case, you measure the day starting at noon, and subtract 24
hours. Even if the length of the calendar day is 23 or 25 hours,
you'll still end up on the previous calendar day, although not at
noon. Since you don't care about the time, the one hour difference
doesn't matter and you end up with the previous date.

=head2 Does Perl have a Year 2000 problem? Is Perl Y2K compliant?

Short answer: No, Perl does not have a Year 2000 problem.  Yes, Perl is
Y2K compliant (whatever that means). The programmers you've hired to
use it, however, probably are not.

Long answer: The question belies a true understanding of the issue.
Perl is just as Y2K compliant as your pencil--no more, and no less.
Can you use your pencil to write a non-Y2K-compliant memo?  Of course
you can.  Is that the pencil's fault?  Of course it isn't.

The date and time functions supplied with Perl (gmtime and localtime)
supply adequate information to determine the year well beyond 2000
(2038 is when trouble strikes for 32-bit machines).  The year returned
by these functions when used in a list context is the year minus 1900.
For years between 1910 and 1999 this I<happens> to be a 2-digit decimal
number. To avoid the year 2000 problem simply do not treat the year as
a 2-digit number.  It isn't.

When gmtime() and localtime() are used in scalar context they return
a timestamp string that contains a fully-expanded year.  For example,
C<$timestamp = gmtime(1005613200)> sets $timestamp to "Tue Nov 13 01:00:00
2001".  There's no year 2000 problem here.

That doesn't mean that Perl can't be used to create non-Y2K compliant
programs.  It can.  But so can your pencil.  It's the fault of the user,
not the language.  At the risk of inflaming the NRA: "Perl doesn't
break Y2K, people do."  See http://www.perl.org/about/y2k.html for
a longer exposition.

=head1 Data: Strings

=head2 How do I validate input?

(contributed by brian d foy)

There are many ways to ensure that values are what you expect or
want to accept. Besides the specific examples that we cover in the
perlfaq, you can also look at the modules with "Assert" and "Validate"
in their names, along with other modules such as C<Regexp::Common>.

Some modules have validation for particular types of input, such
as C<Business::ISBN>, C<Business::CreditCard>, C<Email::Valid>,
and C<Data::Validate::IP>.

=head2 How do I unescape a string?

It depends just what you mean by "escape".  URL escapes are dealt
with in L<perlfaq9>.  Shell escapes with the backslash (C<\>)
character are removed with

s/\\(.)/$1/g;

This won't expand C<"\n"> or C<"\t"> or any other special escapes.

=head2 How do I remove consecutive pairs of characters?

(contributed by brian d foy)

You can use the substitution operator to find pairs of characters (or
runs of characters) and replace them with a single instance. In this
substitution, we find a character in C<(.)>. The memory parentheses
store the matched character in the back-reference C<\1> and we use
that to require that the same thing immediately follow it. We replace
that part of the string with the character in C<$1>.

s/(.)\1/$1/g;

We can also use the transliteration operator, C<tr///>. In this
example, the search list side of our C<tr///> contains nothing, but
the C<c> option complements that so it contains everything. The
replacement list also contains nothing, so the transliteration is
almost a no-op since it won't do any replacements (or more exactly,
replace the character with itself). However, the C<s> option squashes
duplicated and consecutive characters in the string so a character
does not show up next to itself

my $str = 'Haarlem';   # in the Netherlands
	$str =~ tr///cs;       # Now Harlem, like in New York

=head2 How do I expand function calls in a string?

(contributed by brian d foy)

This is documented in L<perlref>, and although it's not the easiest
thing to read, it does work. In each of these examples, we call the
function inside the braces used to dereference a reference. If we
have more than one return value, we can construct and dereference an
anonymous array. In this case, we call the function in list context.

print "The time values are @{ [localtime] }.\n";

If we want to call the function in scalar context, we have to do a bit
more work. We can really have any code we like inside the braces, so
we simply have to end with the scalar reference, although how you do
that is up to you, and you can use code inside the braces. Note that
the use of parens creates a list context, so we need C<scalar> to
force the scalar context on the function:

print "The time is ${\(scalar localtime)}.\n"

print "The time is ${ my $x = localtime; \$x }.\n";

If your function already returns a reference, you don't need to create
the reference yourself.

sub timestamp { my $t = localtime; \$t }

print "The time is ${ timestamp() }.\n";

The C<Interpolation> module can also do a lot of magic for you. You can
specify a variable name, in this case C<E>, to set up a tied hash that
does the interpolation for you. It has several other methods to do this
as well.

use Interpolation E => 'eval';
	print "The time values are $E{localtime()}.\n";

In most cases, it is probably easier to simply use string concatenation,
which also forces scalar context.

print "The time is " . localtime() . ".\n";

=head2 How do I find matching/nesting anything?

This isn't something that can be done in one regular expression, no
matter how complicated.  To find something between two single
characters, a pattern like C</x([^x]*)x/> will get the intervening
bits in $1. For multiple ones, then something more like
C</alpha(.*?)omega/> would be needed. But none of these deals with
nested patterns.  For balanced expressions using C<(>, C<{>, C<[> or
C<< < >> as delimiters, use the CPAN module Regexp::Common, or see
L<perlre/(??{ code })>.  For other cases, you'll have to write a
parser.

If you are serious about writing a parser, there are a number of
modules or oddities that will make your life a lot easier.  There are
the CPAN modules C<Parse::RecDescent>, C<Parse::Yapp>, and
C<Text::Balanced>; and the C<byacc> program. Starting from perl 5.8
the C<Text::Balanced> is part of the standard distribution.

One simple destructive, inside-out approach that you might try is to
pull out the smallest nesting parts one at a time:

while (s/BEGIN((?:(?!BEGIN)(?!END).)*)END//gs) {
		# do something with $1
		}

A more complicated and sneaky approach is to make Perl's regular
expression engine do it for you.  This is courtesy Dean Inada, and
rather has the nature of an Obfuscated Perl Contest entry, but it
really does work:

# $_ contains the string to parse
	# BEGIN and END are the opening and closing markers for the
	# nested text.

@( = ('(','');
	@) = (')','');
	($re=$_)=~s/((BEGIN)|(END)|.)/$)[!$3]\Q$1\E$([!$2]/gs;
	@$ = (eval{/$re/},$@!~/unmatched/i);
	print join("\n",@$[0..$#$]) if( $$[-1] );

=head2 How do I reverse a string?

Use C<reverse()> in scalar context, as documented in
L<perlfunc/reverse>.

$reversed = reverse $string;

=head2 How do I expand tabs in a string?

You can do it yourself:

1 while $string =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e;

Or you can just use the C<Text::Tabs> module (part of the standard Perl
distribution).

use Text::Tabs;
	@expanded_lines = expand(@lines_with_tabs);

=head2 How do I reformat a paragraph?

Use C<Text::Wrap> (part of the standard Perl distribution):

use Text::Wrap;
	print wrap("\t", '  ', @paragraphs);

The paragraphs you give to C<Text::Wrap> should not contain embedded
newlines.  C<Text::Wrap> doesn't justify the lines (flush-right).

Or use the CPAN module C<Text::Autoformat>.  Formatting files can be
easily done by making a shell alias, like so:

alias fmt="perl -i -MText::Autoformat -n0777 \
		-e 'print autoformat $_, {all=>1}' $*"

See the documentation for C<Text::Autoformat> to appreciate its many
capabilities.

=head2 How can I access or change N characters of a string?

You can access the first characters of a string with substr().
To get the first character, for example, start at position 0
and grab the string of length 1.

$string = "Just another Perl Hacker";
	$first_char = substr( $string, 0, 1 );  #  'J'

To change part of a string, you can use the optional fourth
argument which is the replacement string.

substr( $string, 13, 4, "Perl 5.8.0" );

You can also use substr() as an lvalue.

substr( $string, 13, 4 ) =  "Perl 5.8.0";

=head2 How do I change the Nth occurrence of something?

You have to keep track of N yourself.  For example, let's say you want
to change the fifth occurrence of C<"whoever"> or C<"whomever"> into
C<"whosoever"> or C<"whomsoever">, case insensitively.  These
all assume that $_ contains the string to be altered.

$count = 0;
	s{((whom?)ever)}{
	++$count == 5       # is it the 5th?
	    ? "${2}soever"  # yes, swap
	    : $1            # renege and leave it there
		}ige;

In the more general case, you can use the C</g> modifier in a C<while>
loop, keeping count of matches.

$WANT = 3;
	$count = 0;
	$_ = "One fish two fish red fish blue fish";
	while (/(\w+)\s+fish\b/gi) {
		if (++$count == $WANT) {
			print "The third fish is a $1 one.\n";
			}
		}

That prints out: C<"The third fish is a red one.">  You can also use a
repetition count and repeated pattern like this:

/(?:\w+\s+fish\s+){2}(\w+)\s+fish/i;

=head2 How can I count the number of occurrences of a substring within a string?

There are a number of ways, with varying efficiency.  If you want a
count of a certain single character (X) within a string, you can use the
C<tr///> function like so:

$string = "ThisXlineXhasXsomeXx'sXinXit";
	$count = ($string =~ tr/X//);
	print "There are $count X characters in the string";

This is fine if you are just looking for a single character.  However,
if you are trying to count multiple character substrings within a
larger string, C<tr///> won't work.  What you can do is wrap a while()
loop around a global pattern match.  For example, let's count negative
integers:

$string = "-9 55 48 -2 23 -76 4 14 -44";
	while ($string =~ /-\d+/g) { $count++ }
	print "There are $count negative numbers in the string";

Another version uses a global match in list context, then assigns the
result to a scalar, producing a count of the number of matches.

$count = () = $string =~ /-\d+/g;

=head2 Does Perl have a Year 2038 problem?

No, all of Perl's built in date and time functions and modules will
work to about 2 billion years before and after 1970.

Many systems cannot count time past the year 2038.  Older versions of
Perl were dependent on the system to do date calculation and thus
shared their 2038 bug.

=head2 How do I capitalize all the words on one line?
X<Text::Autoformat> X<capitalize> X<case, title> X<case, sentence>

(contributed by brian d foy)

Damian Conway's L<Text::Autoformat> handles all of the thinking
for you.

use Text::Autoformat;
	my $x = "Dr. Strangelove or: How I Learned to Stop ".
	  "Worrying and Love the Bomb";

print $x, "\n";
	for my $style (qw( sentence title highlight )) {
		print autoformat($x, { case => $style }), "\n";
		}

How do you want to capitalize those words?

FRED AND BARNEY'S LODGE        # all uppercase
	Fred And Barney's Lodge        # title case
	Fred and Barney's Lodge        # highlight case

It's not as easy a problem as it looks. How many words do you think
are in there? Wait for it... wait for it.... If you answered 5
you're right. Perl words are groups of C<\w+>, but that's not what
you want to capitalize. How is Perl supposed to know not to capitalize
that C<s> after the apostrophe? You could try a regular expression:

$string =~ s/ (
				 (^\w)    #at the beginning of the line
				   |      # or
				 (\s\w)   #preceded by whitespace
				   )
				/\U$1/xg;

$string =~ s/([\w']+)/\u\L$1/g;

Now, what if you don't want to capitalize that "and"? Just use
L<Text::Autoformat> and get on with the next problem. :)

=head2 How can I split a [character] delimited string except when inside [character]?

Several modules can handle this sort of parsing--C<Text::Balanced>,
C<Text::CSV>, C<Text::CSV_XS>, and C<Text::ParseWords>, among others.

Take the example case of trying to split a string that is
comma-separated into its different fields. You can't use C<split(/,/)>
because you shouldn't split if the comma is inside quotes.  For
example, take a data line like this:

SAR001,"","Cimetrix, Inc","Bob Smith","CAM",N,8,1,0,7,"Error, Core Dumped"

Due to the restriction of the quotes, this is a fairly complex
problem.  Thankfully, we have Jeffrey Friedl, author of
I<Mastering Regular Expressions>, to handle these for us.  He
suggests (assuming your string is contained in C<$text>):

@new = ();
	 push(@new, $+) while $text =~ m{
		 "([^\"\\]*(?:\\.[^\"\\]*)*)",?  # groups the phrase inside the quotes
		| ([^,]+),?
		| ,
		}gx;
	 push(@new, undef) if substr($text,-1,1) eq ',';

If you want to represent quotation marks inside a
quotation-mark-delimited field, escape them with backslashes (eg,
C<"like \"this\"">.

Alternatively, the C<Text::ParseWords> module (part of the standard
Perl distribution) lets you say:

use Text::ParseWords;
	@new = quotewords(",", 0, $text);

=head2 How do I strip blank space from the beginning/end of a string?

(contributed by brian d foy)

A substitution can do this for you. For a single line, you want to
replace all the leading or trailing whitespace with nothing. You
can do that with a pair of substitutions.

s/^\s+//;
	s/\s+$//;

You can also write that as a single substitution, although it turns
out the combined statement is slower than the separate ones. That
might not matter to you, though.

s/^\s+|\s+$//g;

In this regular expression, the alternation matches either at the
beginning or the end of the string since the anchors have a lower
precedence than the alternation. With the C</g> flag, the substitution
makes all possible matches, so it gets both. Remember, the trailing
newline matches the C<\s+>, and  the C<$> anchor can match to the
physical end of the string, so the newline disappears too. Just add
the newline to the output, which has the added benefit of preserving
"blank" (consisting entirely of whitespace) lines which the C<^\s+>
would remove all by itself.

while( <> )
		{
		s/^\s+|\s+$//g;
		print "$_\n";
		}

For a multi-line string, you can apply the regular expression
to each logical line in the string by adding the C</m> flag (for
"multi-line"). With the C</m> flag, the C<$> matches I<before> an
embedded newline, so it doesn't remove it. It still removes the
newline at the end of the string.

$string =~ s/^\s+|\s+$//gm;

Remember that lines consisting entirely of whitespace will disappear,
since the first part of the alternation can match the entire string
and replace it with nothing. If need to keep embedded blank lines,
you have to do a little more work. Instead of matching any whitespace
(since that includes a newline), just match the other whitespace.

$string =~ s/^[\t\f ]+|[\t\f ]+$//mg;

=head2 How do I pad a string with blanks or pad a number with zeroes?

In the following examples, C<$pad_len> is the length to which you wish
to pad the string, C<$text> or C<$num> contains the string to be padded,
and C<$pad_char> contains the padding character. You can use a single
character string constant instead of the C<$pad_char> variable if you
know what it is in advance. And in the same way you can use an integer in
place of C<$pad_len> if you know the pad length in advance.

The simplest method uses the C<sprintf> function. It can pad on the left
or right with blanks and on the left with zeroes and it will not
truncate the result. The C<pack> function can only pad strings on the
right with blanks and it will truncate the result to a maximum length of
C<$pad_len>.

# Left padding a string with blanks (no truncation):
	$padded = sprintf("%${pad_len}s", $text);
	$padded = sprintf("%*s", $pad_len, $text);  # same thing

# Right padding a string with blanks (no truncation):
	$padded = sprintf("%-${pad_len}s", $text);
	$padded = sprintf("%-*s", $pad_len, $text); # same thing

# Left padding a number with 0 (no truncation):
	$padded = sprintf("%0${pad_len}d", $num);
	$padded = sprintf("%0*d", $pad_len, $num); # same thing

# Right padding a string with blanks using pack (will truncate):
	$padded = pack("A$pad_len",$text);

If you need to pad with a character other than blank or zero you can use
one of the following methods.  They all generate a pad string with the
C<x> operator and combine that with C<$text>. These methods do
not truncate C<$text>.

Left and right padding with any character, creating a new string:

$padded = $pad_char x ( $pad_len - length( $text ) ) . $text;
	$padded = $text . $pad_char x ( $pad_len - length( $text ) );

Left and right padding with any character, modifying C<$text> directly:

substr( $text, 0, 0 ) = $pad_char x ( $pad_len - length( $text ) );
	$text .= $pad_char x ( $pad_len - length( $text ) );

=head2 How do I extract selected columns from a string?

(contributed by brian d foy)

If you know where the columns that contain the data, you can
use C<substr> to extract a single column.

my $column = substr( $line, $start_column, $length );

You can use C<split> if the columns are separated by whitespace or
some other delimiter, as long as whitespace or the delimiter cannot
appear as part of the data.

my $line    = ' fred barney   betty   ';
	my @columns = split /\s+/, $line;
		# ( '', 'fred', 'barney', 'betty' );

my $line    = 'fred||barney||betty';
	my @columns = split /\|/, $line;
		# ( 'fred', '', 'barney', '', 'betty' );

If you want to work with comma-separated values, don't do this since
that format is a bit more complicated. Use one of the modules that
handle that format, such as C<Text::CSV>, C<Text::CSV_XS>, or
C<Text::CSV_PP>.

If you want to break apart an entire line of fixed columns, you can use
C<unpack> with the A (ASCII) format. by using a number after the format
specifier, you can denote the column width. See the C<pack> and C<unpack>
entries in L<perlfunc> for more details.

my @fields = unpack( $line, "A8 A8 A8 A16 A4" );

Note that spaces in the format argument to C<unpack> do not denote literal
spaces. If you have space separated data, you may want C<split> instead.

=head2 How do I find the soundex value of a string?

(contributed by brian d foy)

You can use the Text::Soundex module. If you want to do fuzzy or close
matching, you might also try the C<String::Approx>, and
C<Text::Metaphone>, and C<Text::DoubleMetaphone> modules.

=head2 How can I expand variables in text strings?

(contributed by brian d foy)

If you can avoid it, don't, or if you can use a templating system,
such as C<Text::Template> or C<Template> Toolkit, do that instead. You
might even be able to get the job done with C<sprintf> or C<printf>:

my $string = sprintf 'Say hello to %s and %s', $foo, $bar;

However, for the one-off simple case where I don't want to pull out a
full templating system, I'll use a string that has two Perl scalar
variables in it. In this example, I want to expand C<$foo> and C<$bar>
to their variable's values:

my $foo = 'Fred';
	my $bar = 'Barney';
	$string = 'Say hello to $foo and $bar';

One way I can do this involves the substitution operator and a double
C</e> flag.  The first C</e> evaluates C<$1> on the replacement side and
turns it into C<$foo>. The second /e starts with C<$foo> and replaces
it with its value. C<$foo>, then, turns into 'Fred', and that's finally
what's left in the string:

$string =~ s/(\$\w+)/$1/eeg; # 'Say hello to Fred and Barney'

The C</e> will also silently ignore violations of strict, replacing
undefined variable names with the empty string. Since I'm using the
C</e> flag (twice even!), I have all of the same security problems I
have with C<eval> in its string form. If there's something odd in
C<$foo>, perhaps something like C<@{[ system "rm -rf /" ]}>, then
I could get myself in trouble.

To get around the security problem, I could also pull the values from
a hash instead of evaluating variable names. Using a single C</e>, I
can check the hash to ensure the value exists, and if it doesn't, I
can replace the missing value with a marker, in this case C<???> to
signal that I missed something:

my $string = 'This has $foo and $bar';

my %Replacements = (
		foo  => 'Fred',
		);

# $string =~ s/\$(\w+)/$Replacements{$1}/g;
	$string =~ s/\$(\w+)/
		exists $Replacements{$1} ? $Replacements{$1} : '???'
		/eg;

print $string;

=head2 What's wrong with always quoting "$vars"?

The problem is that those double-quotes force
stringification--coercing numbers and references into strings--even
when you don't want them to be strings.  Think of it this way:
double-quote expansion is used to produce new strings.  If you already
have a string, why do you need more?

If you get used to writing odd things like these:

print "$var";   	# BAD
	$new = "$old";   	# BAD
	somefunc("$var");	# BAD

You'll be in trouble.  Those should (in 99.8% of the cases) be
the simpler and more direct:

print $var;
	$new = $old;
	somefunc($var);

Otherwise, besides slowing you down, you're going to break code when
the thing in the scalar is actually neither a string nor a number, but
a reference:

func(\@array);
	sub func {
		my $aref = shift;
		my $oref = "$aref";  # WRONG
		}

You can also get into subtle problems on those few operations in Perl
that actually do care about the difference between a string and a
number, such as the magical C<++> autoincrement operator or the
syscall() function.

Stringification also destroys arrays.

@lines = `command`;
	print "@lines";     # WRONG - extra blanks
	print @lines;       # right

=head2 Why don't my E<lt>E<lt>HERE documents work?

Check for these three things:

=over 4

=item There must be no space after the E<lt>E<lt> part.

=item There (probably) should be a semicolon at the end.

=item You can't (easily) have any space in front of the tag.

=back

If you want to indent the text in the here document, you
can do this:

# all in one
    ($VAR = <<HERE_TARGET) =~ s/^\s+//gm;
        your text
        goes here
    HERE_TARGET

But the HERE_TARGET must still be flush against the margin.
If you want that indented also, you'll have to quote
in the indentation.

($quote = <<'    FINIS') =~ s/^\s+//gm;
            ...we will have peace, when you and all your works have
            perished--and the works of your dark master to whom you
            would deliver us. You are a liar, Saruman, and a corrupter
            of men's hearts.  --Theoden in /usr/src/perl/taint.c
        FINIS
    $quote =~ s/\s+--/\n--/;

A nice general-purpose fixer-upper function for indented here documents
follows.  It expects to be called with a here document as its argument.
It looks to see whether each line begins with a common substring, and
if so, strips that substring off.  Otherwise, it takes the amount of leading
whitespace found on the first line and removes that much off each
subsequent line.

sub fix {
        local $_ = shift;
        my ($white, $leader);  # common whitespace and common leading string
        if (/^\s*(?:([^\w\s]+)(\s*).*\n)(?:\s*\1\2?.*\n)+$/) {
            ($white, $leader) = ($2, quotemeta($1));
        } else {
            ($white, $leader) = (/^(\s+)/, '');
        }
        s/^\s*?$leader(?:$white)?//gm;
        return $_;
    }

This works with leading special strings, dynamically determined:

$remember_the_main = fix<<'    MAIN_INTERPRETER_LOOP';
	@@@ int
	@@@ runops() {
	@@@     SAVEI32(runlevel);
	@@@     runlevel++;
	@@@     while ( op = (*op->op_ppaddr)() );
	@@@     TAINT_NOT;
	@@@     return 0;
	@@@ }
	MAIN_INTERPRETER_LOOP

Or with a fixed amount of leading whitespace, with remaining
indentation correctly preserved:

$poem = fix<<EVER_ON_AND_ON;
       Now far ahead the Road has gone,
	  And I must follow, if I can,
       Pursuing it with eager feet,
	  Until it joins some larger way
       Where many paths and errands meet.
	  And whither then? I cannot say.
		--Bilbo in /usr/src/perl/pp_ctl.c
	EVER_ON_AND_ON

=head1 Data: Arrays

=head2 What is the difference between a list and an array?

An array has a changeable length.  A list does not.  An array is
something you can push or pop, while a list is a set of values.  Some
people make the distinction that a list is a value while an array is a
variable. Subroutines are passed and return lists, you put things into
list context, you initialize arrays with lists, and you C<foreach()>
across a list.  C<@> variables are arrays, anonymous arrays are
arrays, arrays in scalar context behave like the number of elements in
them, subroutines access their arguments through the array C<@_>, and
C<push>/C<pop>/C<shift> only work on arrays.

As a side note, there's no such thing as a list in scalar context.
When you say

$scalar = (2, 5, 7, 9);

you're using the comma operator in scalar context, so it uses the scalar
comma operator.  There never was a list there at all! This causes the
last value to be returned: 9.

=head2 What is the difference between $array[1] and @array[1]?

The former is a scalar value; the latter an array slice, making
it a list with one (scalar) value.  You should use $ when you want a
scalar value (most of the time) and @ when you want a list with one
scalar value in it (very, very rarely; nearly never, in fact).

Sometimes it doesn't make a difference, but sometimes it does.
For example, compare:

$good[0] = `some program that outputs several lines`;

with

@bad[0]  = `same program that outputs several lines`;

The C<use warnings> pragma and the B<-w> flag will warn you about these
matters.

=head2 How can I remove duplicate elements from a list or array?

(contributed by brian d foy)

Use a hash. When you think the words "unique" or "duplicated", think
"hash keys".

If you don't care about the order of the elements, you could just
create the hash then extract the keys. It's not important how you
create that hash: just that you use C<keys> to get the unique
elements.

my %hash   = map { $_, 1 } @array;
	# or a hash slice: @hash{ @array } = ();
	# or a foreach: $hash{$_} = 1 foreach ( @array );

my @unique = keys %hash;

If you want to use a module, try the C<uniq> function from
C<List::MoreUtils>. In list context it returns the unique elements,
preserving their order in the list. In scalar context, it returns the
number of unique elements.

use List::MoreUtils qw(uniq);

my @unique = uniq( 1, 2, 3, 4, 4, 5, 6, 5, 7 ); # 1,2,3,4,5,6,7
	my $unique = uniq( 1, 2, 3, 4, 4, 5, 6, 5, 7 ); # 7

You can also go through each element and skip the ones you've seen
before. Use a hash to keep track. The first time the loop sees an
element, that element has no key in C<%Seen>. The C<next> statement
creates the key and immediately uses its value, which is C<undef>, so
the loop continues to the C<push> and increments the value for that
key. The next time the loop sees that same element, its key exists in
the hash I<and> the value for that key is true (since it's not 0 or
C<undef>), so the next skips that iteration and the loop goes to the
next element.

my @unique = ();
	my %seen   = ();

foreach my $elem ( @array )
		{
		next if $seen{ $elem }++;
		push @unique, $elem;
		}

You can write this more briefly using a grep, which does the
same thing.

my %seen = ();
	my @unique = grep { ! $seen{ $_ }++ } @array;

=head2 How can I tell whether a certain element is contained in a list or array?

(portions of this answer contributed by Anno Siegel and brian d foy)

Hearing the word "in" is an I<in>dication that you probably should have
used a hash, not a list or array, to store your data.  Hashes are
designed to answer this question quickly and efficiently.  Arrays aren't.

That being said, there are several ways to approach this.  In Perl 5.10
and later, you can use the smart match operator to check that an item is
contained in an array or a hash:

use 5.010;

if( $item ~~ @array )
		{
		say "The array contains $item"
		}

if( $item ~~ %hash )
		{
		say "The hash contains $item"
		}

With earlier versions of Perl, you have to do a bit more work. If you
are going to make this query many times over arbitrary string values,
the fastest way is probably to invert the original array and maintain a
hash whose keys are the first array's values:

@blues = qw/azure cerulean teal turquoise lapis-lazuli/;
	%is_blue = ();
	for (@blues) { $is_blue{$_} = 1 }

Now you can check whether C<$is_blue{$some_color}>.  It might have
been a good idea to keep the blues all in a hash in the first place.

If the values are all small integers, you could use a simple indexed
array.  This kind of an array will take up less space:

@primes = (2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31);
	@is_tiny_prime = ();
	for (@primes) { $is_tiny_prime[$_] = 1 }
	# or simply  @istiny_prime[@primes] = (1) x @primes;

Now you check whether $is_tiny_prime[$some_number].

If the values in question are integers instead of strings, you can save
quite a lot of space by using bit strings instead:

@articles = ( 1..10, 150..2000, 2017 );
	undef $read;
	for (@articles) { vec($read,$_,1) = 1 }

Now check whether C<vec($read,$n,1)> is true for some C<$n>.

These methods guarantee fast individual tests but require a re-organization
of the original list or array.  They only pay off if you have to test
multiple values against the same array.

If you are testing only once, the standard module C<List::Util> exports
the function C<first> for this purpose.  It works by stopping once it
finds the element. It's written in C for speed, and its Perl equivalent
looks like this subroutine:

sub first (&@) {
		my $code = shift;
		foreach (@_) {
			return $_ if &{$code}();
		}
		undef;
	}

If speed is of little concern, the common idiom uses grep in scalar context
(which returns the number of items that passed its condition) to traverse the
entire list. This does have the benefit of telling you how many matches it
found, though.

my $is_there = grep $_ eq $whatever, @array;

If you want to actually extract the matching elements, simply use grep in
list context.

my @matches = grep $_ eq $whatever, @array;

=head2 How do I compute the difference of two arrays?  How do I compute the intersection of two arrays?

Use a hash.  Here's code to do both and more.  It assumes that each
element is unique in a given array:

@union = @intersection = @difference = ();
	%count = ();
	foreach $element (@array1, @array2) { $count{$element}++ }
	foreach $element (keys %count) {
		push @union, $element;
		push @{ $count{$element} > 1 ? \@intersection : \@difference }, $element;
		}

Note that this is the I<symmetric difference>, that is, all elements
in either A or in B but not in both.  Think of it as an xor operation.

=head2 How do I test whether two arrays or hashes are equal?

With Perl 5.10 and later, the smart match operator can give you the answer
with the least amount of work:

use 5.010;

if( @array1 ~~ @array2 )
		{
		say "The arrays are the same";
		}

if( %hash1 ~~ %hash2 ) # doesn't check values!
		{
		say "The hash keys are the same";
		}

The following code works for single-level arrays.  It uses a
stringwise comparison, and does not distinguish defined versus
undefined empty strings.  Modify if you have other needs.

$are_equal = compare_arrays(\@frogs, \@toads);

sub compare_arrays {
		my ($first, $second) = @_;
		no warnings;  # silence spurious -w undef complaints
		return 0 unless @$first == @$second;
		for (my $i = 0; $i < @$first; $i++) {
			return 0 if $first->[$i] ne $second->[$i];
			}
		return 1;
		}

For multilevel structures, you may wish to use an approach more
like this one.  It uses the CPAN module C<FreezeThaw>:

use FreezeThaw qw(cmpStr);
	@a = @b = ( "this", "that", [ "more", "stuff" ] );

printf "a and b contain %s arrays\n",
		cmpStr(\@a, \@b) == 0
		? "the same"
		: "different";

This approach also works for comparing hashes.  Here we'll demonstrate
two different answers:

use FreezeThaw qw(cmpStr cmpStrHard);

%a = %b = ( "this" => "that", "extra" => [ "more", "stuff" ] );
	$a{EXTRA} = \%b;
	$b{EXTRA} = \%a;

printf "a and b contain %s hashes\n",
	cmpStr(\%a, \%b) == 0 ? "the same" : "different";

printf "a and b contain %s hashes\n",
	cmpStrHard(\%a, \%b) == 0 ? "the same" : "different";

The first reports that both those the hashes contain the same data,
while the second reports that they do not.  Which you prefer is left as
an exercise to the reader.

=head2 How do I find the first array element for which a condition is true?

To find the first array element which satisfies a condition, you can
use the C<first()> function in the C<List::Util> module, which comes
with Perl 5.8. This example finds the first element that contains
"Perl".

use List::Util qw(first);

my $element = first { /Perl/ } @array;

If you cannot use C<List::Util>, you can make your own loop to do the
same thing.  Once you find the element, you stop the loop with last.

my $found;
	foreach ( @array ) {
		if( /Perl/ ) { $found = $_; last }
		}

If you want the array index, you can iterate through the indices
and check the array element at each index until you find one
that satisfies the condition.

my( $found, $index ) = ( undef, -1 );
	for( $i = 0; $i < @array; $i++ ) {
		if( $array[$i] =~ /Perl/ ) {
			$found = $array[$i];
			$index = $i;
			last;
			}
		}

=head2 How do I handle linked lists?

In general, you usually don't need a linked list in Perl, since with
regular arrays, you can push and pop or shift and unshift at either
end, or you can use splice to add and/or remove arbitrary number of
elements at arbitrary points.  Both pop and shift are O(1)
operations on Perl's dynamic arrays.  In the absence of shifts and
pops, push in general needs to reallocate on the order every log(N)
times, and unshift will need to copy pointers each time.

If you really, really wanted, you could use structures as described in
L<perldsc> or L<perltoot> and do just what the algorithm book tells
you to do.  For example, imagine a list node like this:

$node = {
		VALUE => 42,
		LINK  => undef,
		};

You could walk the list this way:

print "List: ";
	for ($node = $head;  $node; $node = $node->{LINK}) {
		print $node->{VALUE}, " ";
		}
	print "\n";

You could add to the list this way:

my ($head, $tail);
	$tail = append($head, 1);       # grow a new head
	for $value ( 2 .. 10 ) {
		$tail = append($tail, $value);
		}

sub append {
		my($list, $value) = @_;
		my $node = { VALUE => $value };
		if ($list) {
			$node->{LINK} = $list->{LINK};
			$list->{LINK} = $node;
			}
		else {
			$_[0] = $node;      # replace caller's version
			}
		return $node;
		}

But again, Perl's built-in are virtually always good enough.

=head2 How do I handle circular lists?
X<circular> X<array> X<Tie::Cycle> X<Array::Iterator::Circular>
X<cycle> X<modulus>

(contributed by brian d foy)

If you want to cycle through an array endlessy, you can increment the
index modulo the number of elements in the array:

my @array = qw( a b c );
	my $i = 0;

while( 1 ) {
		print $array[ $i++ % @array ], "\n";
		last if $i > 20;
		}

You can also use C<Tie::Cycle> to use a scalar that always has the
next element of the circular array:

use Tie::Cycle;

tie my $cycle, 'Tie::Cycle', [ qw( FFFFFF 000000 FFFF00 ) ];

print $cycle; # FFFFFF
	print $cycle; # 000000
	print $cycle; # FFFF00

The C<Array::Iterator::Circular> creates an iterator object for
circular arrays:

use Array::Iterator::Circular;

my $color_iterator = Array::Iterator::Circular->new(
		qw(red green blue orange)
		);

foreach ( 1 .. 20 ) {
		print $color_iterator->next, "\n";
		}

=head2 How do I shuffle an array randomly?

If you either have Perl 5.8.0 or later installed, or if you have
Scalar-List-Utils 1.03 or later installed, you can say:

use List::Util 'shuffle';

@shuffled = shuffle(@list);

If not, you can use a Fisher-Yates shuffle.

sub fisher_yates_shuffle {
		my $deck = shift;  # $deck is a reference to an array
		return unless @$deck; # must not be empty!

my $i = @$deck;
		while (--$i) {
			my $j = int rand ($i+1);
			@$deck[$i,$j] = @$deck[$j,$i];
			}
	}

# shuffle my mpeg collection
	#
	my @mpeg = <audio/*/*.mp3>;
	fisher_yates_shuffle( \@mpeg );    # randomize @mpeg in place
	print @mpeg;

Note that the above implementation shuffles an array in place,
unlike the C<List::Util::shuffle()> which takes a list and returns
a new shuffled list.

You've probably seen shuffling algorithms that work using splice,
randomly picking another element to swap the current element with

srand;
	@new = ();
	@old = 1 .. 10;  # just a demo
	while (@old) {
		push(@new, splice(@old, rand @old, 1));
		}

This is bad because splice is already O(N), and since you do it N
times, you just invented a quadratic algorithm; that is, O(N**2).
This does not scale, although Perl is so efficient that you probably
won't notice this until you have rather largish arrays.

=head2 How do I process/modify each element of an array?

Use C<for>/C<foreach>:

for (@lines) {
		s/foo/bar/;	# change that word
		tr/XZ/ZX/;	# swap those letters
		}

Here's another; let's compute spherical volumes:

for (@volumes = @radii) {   # @volumes has changed parts
		$_ **= 3;
		$_ *= (4/3) * 3.14159;  # this will be constant folded
		}

which can also be done with C<map()> which is made to transform
one list into another:

@volumes = map {$_ ** 3 * (4/3) * 3.14159} @radii;

If you want to do the same thing to modify the values of the
hash, you can use the C<values> function.  As of Perl 5.6
the values are not copied, so if you modify $orbit (in this
case), you modify the value.

for $orbit ( values %orbits ) {
		($orbit **= 3) *= (4/3) * 3.14159;
		}

Prior to perl 5.6 C<values> returned copies of the values,
so older perl code often contains constructions such as
C<@orbits{keys %orbits}> instead of C<values %orbits> where
the hash is to be modified.

=head2 How do I select a random element from an array?

Use the C<rand()> function (see L<perlfunc/rand>):

$index   = rand @array;
	$element = $array[$index];

Or, simply:

my $element = $array[ rand @array ];

=head2 How do I permute N elements of a list?
X<List::Permuter> X<permute> X<Algorithm::Loops> X<Knuth>
X<The Art of Computer Programming> X<Fischer-Krause>

Use the C<List::Permutor> module on CPAN. If the list is actually an
array, try the C<Algorithm::Permute> module (also on CPAN). It's
written in XS code and is very efficient:

use Algorithm::Permute;

my @array = 'a'..'d';
	my $p_iterator = Algorithm::Permute->new ( \@array );

while (my @perm = $p_iterator->next) {
	   print "next permutation: (@perm)\n";
		}

For even faster execution, you could do:

use Algorithm::Permute;

my @array = 'a'..'d';

Algorithm::Permute::permute {
		print "next permutation: (@array)\n";
		} @array;

Here's a little program that generates all permutations of all the
words on each line of input. The algorithm embodied in the
C<permute()> function is discussed in Volume 4 (still unpublished) of
Knuth's I<The Art of Computer Programming> and will work on any list:

#!/usr/bin/perl -n
	# Fischer-Krause ordered permutation generator

sub permute (&@) {
		my $code = shift;
		my @idx = 0..$#_;
		while ( $code->(@_[@idx]) ) {
			my $p = $#idx;
			--$p while $idx[$p-1] > $idx[$p];
			my $q = $p or return;
			push @idx, reverse splice @idx, $p;
			++$q while $idx[$p-1] > $idx[$q];
			@idx[$p-1,$q]=@idx[$q,$p-1];
		}
	}

permute { print "@_\n" } split;

The C<Algorithm::Loops> module also provides the C<NextPermute> and
C<NextPermuteNum> functions which efficiently find all unique permutations
of an array, even if it contains duplicate values, modifying it in-place:
if its elements are in reverse-sorted order then the array is reversed,
making it sorted, and it returns false; otherwise the next
permutation is returned.

C<NextPermute> uses string order and C<NextPermuteNum> numeric order, so
you can enumerate all the permutations of C<0..9> like this:

use Algorithm::Loops qw(NextPermuteNum);

my @list= 0..9;
    do { print "@list\n" } while NextPermuteNum @list;

=head2 How do I sort an array by (anything)?

Supply a comparison function to sort() (described in L<perlfunc/sort>):

@list = sort { $a <=> $b } @list;

The default sort function is cmp, string comparison, which would
sort C<(1, 2, 10)> into C<(1, 10, 2)>.  C<< <=> >>, used above, is
the numerical comparison operator.

If you have a complicated function needed to pull out the part you
want to sort on, then don't do it inside the sort function.  Pull it
out first, because the sort BLOCK can be called many times for the
same element.  Here's an example of how to pull out the first word
after the first number on each item, and then sort those words
case-insensitively.

@idx = ();
	for (@data) {
		($item) = /\d+\s*(\S+)/;
		push @idx, uc($item);
	    }
	@sorted = @data[ sort { $idx[$a] cmp $idx[$b] } 0 .. $#idx ];

which could also be written this way, using a trick
that's come to be known as the Schwartzian Transform:

@sorted = map  { $_->[0] }
		sort { $a->[1] cmp $b->[1] }
		map  { [ $_, uc( (/\d+\s*(\S+)/)[0]) ] } @data;

If you need to sort on several fields, the following paradigm is useful.

@sorted = sort {
		field1($a) <=> field1($b) ||
		field2($a) cmp field2($b) ||
		field3($a) cmp field3($b)
		} @data;

This can be conveniently combined with precalculation of keys as given
above.

See the F<sort> article in the "Far More Than You Ever Wanted
To Know" collection in http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz for
more about this approach.

See also the question later in L<perlfaq4> on sorting hashes.

=head2 How do I manipulate arrays of bits?

Use C<pack()> and C<unpack()>, or else C<vec()> and the bitwise
operations.

For example, you don't have to store individual bits in an array
(which would mean that you're wasting a lot of space). To convert an
array of bits to a string, use C<vec()> to set the right bits. This
sets C<$vec> to have bit N set only if C<$ints[N]> was set:

@ints = (...); # array of bits, e.g. ( 1, 0, 0, 1, 1, 0 ... )
	$vec = '';
	foreach( 0 .. $#ints ) {
		vec($vec,$_,1) = 1 if $ints[$_];
		}

The string C<$vec> only takes up as many bits as it needs. For
instance, if you had 16 entries in C<@ints>, C<$vec> only needs two
bytes to store them (not counting the scalar variable overhead).

Here's how, given a vector in C<$vec>, you can get those bits into
your C<@ints> array:

sub bitvec_to_list {
		my $vec = shift;
		my @ints;
		# Find null-byte density then select best algorithm
		if ($vec =~ tr/\0// / length $vec > 0.95) {
			use integer;
			my $i;

# This method is faster with mostly null-bytes
			while($vec =~ /[^\0]/g ) {
				$i = -9 + 8 * pos $vec;
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				push @ints, $i if vec($vec, ++$i, 1);
				}
			}
		else {
			# This method is a fast general algorithm
			use integer;
			my $bits = unpack "b*", $vec;
			push @ints, 0 if $bits =~ s/^(\d)// && $1;
			push @ints, pos $bits while($bits =~ /1/g);
			}

return \@ints;
		}

This method gets faster the more sparse the bit vector is.
(Courtesy of Tim Bunce and Winfried Koenig.)

You can make the while loop a lot shorter with this suggestion
from Benjamin Goldberg:

while($vec =~ /[^\0]+/g ) {
		push @ints, grep vec($vec, $_, 1), $-[0] * 8 .. $+[0] * 8;
		}

Or use the CPAN module C<Bit::Vector>:

$vector = Bit::Vector->new($num_of_bits);
	$vector->Index_List_Store(@ints);
	@ints = $vector->Index_List_Read();

C<Bit::Vector> provides efficient methods for bit vector, sets of
small integers and "big int" math.

Here's a more extensive illustration using vec():

# vec demo
	$vector = "\xff\x0f\xef\xfe";
	print "Ilya's string \\xff\\x0f\\xef\\xfe represents the number ",
	unpack("N", $vector), "\n";
	$is_set = vec($vector, 23, 1);
	print "Its 23rd bit is ", $is_set ? "set" : "clear", ".\n";
	pvec($vector);

set_vec(1,1,1);
	set_vec(3,1,1);
	set_vec(23,1,1);

set_vec(3,1,3);
	set_vec(3,2,3);
	set_vec(3,4,3);
	set_vec(3,4,7);
	set_vec(3,8,3);
	set_vec(3,8,7);

set_vec(0,32,17);
	set_vec(1,32,17);

sub set_vec {
		my ($offset, $width, $value) = @_;
		my $vector = '';
		vec($vector, $offset, $width) = $value;
		print "offset=$offset width=$width value=$value\n";
		pvec($vector);
		}

sub pvec {
		my $vector = shift;
		my $bits = unpack("b*", $vector);
		my $i = 0;
		my $BASE = 8;

print "vector length in bytes: ", length($vector), "\n";
		@bytes = unpack("A8" x length($vector), $bits);
		print "bits are: @bytes\n\n";
		}

=head2 Why does defined() return true on empty arrays and hashes?

The short story is that you should probably only use defined on scalars or
functions, not on aggregates (arrays and hashes).  See L<perlfunc/defined>
in the 5.004 release or later of Perl for more detail.

=head1 Data: Hashes (Associative Arrays)

=head2 How do I process an entire hash?

(contributed by brian d foy)

There are a couple of ways that you can process an entire hash. You
can get a list of keys, then go through each key, or grab a one
key-value pair at a time.

To go through all of the keys, use the C<keys> function. This extracts
all of the keys of the hash and gives them back to you as a list. You
can then get the value through the particular key you're processing:

foreach my $key ( keys %hash ) {
		my $value = $hash{$key}
		...
		}

Once you have the list of keys, you can process that list before you
process the hash elements. For instance, you can sort the keys so you
can process them in lexical order:

foreach my $key ( sort keys %hash ) {
		my $value = $hash{$key}
		...
		}

Or, you might want to only process some of the items. If you only want
to deal with the keys that start with C<text:>, you can select just
those using C<grep>:

foreach my $key ( grep /^text:/, keys %hash ) {
		my $value = $hash{$key}
		...
		}

If the hash is very large, you might not want to create a long list of
keys. To save some memory, you can grab one key-value pair at a time using
C<each()>, which returns a pair you haven't seen yet:

while( my( $key, $value ) = each( %hash ) ) {
		...
		}

The C<each> operator returns the pairs in apparently random order, so if
ordering matters to you, you'll have to stick with the C<keys> method.

The C<each()> operator can be a bit tricky though. You can't add or
delete keys of the hash while you're using it without possibly
skipping or re-processing some pairs after Perl internally rehashes
all of the elements. Additionally, a hash has only one iterator, so if
you use C<keys>, C<values>, or C<each> on the same hash, you can reset
the iterator and mess up your processing. See the C<each> entry in
L<perlfunc> for more details.

=head2 How do I merge two hashes?
X<hash> X<merge> X<slice, hash>

(contributed by brian d foy)

Before you decide to merge two hashes, you have to decide what to do
if both hashes contain keys that are the same and if you want to leave
the original hashes as they were.

If you want to preserve the original hashes, copy one hash (C<%hash1>)
to a new hash (C<%new_hash>), then add the keys from the other hash
(C<%hash2> to the new hash. Checking that the key already exists in
C<%new_hash> gives you a chance to decide what to do with the
duplicates:

my %new_hash = %hash1; # make a copy; leave %hash1 alone

foreach my $key2 ( keys %hash2 )
		{
		if( exists $new_hash{$key2} )
			{
			warn "Key [$key2] is in both hashes!";
			# handle the duplicate (perhaps only warning)
			...
			next;
			}
		else
			{
			$new_hash{$key2} = $hash2{$key2};
			}
		}

If you don't want to create a new hash, you can still use this looping
technique; just change the C<%new_hash> to C<%hash1>.

foreach my $key2 ( keys %hash2 )
		{
		if( exists $hash1{$key2} )
			{
			warn "Key [$key2] is in both hashes!";
			# handle the duplicate (perhaps only warning)
			...
			next;
			}
		else
			{
			$hash1{$key2} = $hash2{$key2};
			}
		}

If you don't care that one hash overwrites keys and values from the other, you
could just use a hash slice to add one hash to another. In this case, values
from C<%hash2> replace values from C<%hash1> when they have keys in common:

@hash1{ keys %hash2 } = values %hash2;

=head2 What happens if I add or remove keys from a hash while iterating over it?

(contributed by brian d foy)

The easy answer is "Don't do that!"

If you iterate through the hash with each(), you can delete the key
most recently returned without worrying about it.  If you delete or add
other keys, the iterator may skip or double up on them since perl
may rearrange the hash table.  See the
entry for C<each()> in L<perlfunc>.

=head2 How do I look up a hash element by value?

Create a reverse hash:

%by_value = reverse %by_key;
	$key = $by_value{$value};

That's not particularly efficient.  It would be more space-efficient
to use:

while (($key, $value) = each %by_key) {
		$by_value{$value} = $key;
	    }

If your hash could have repeated values, the methods above will only find
one of the associated keys.   This may or may not worry you.  If it does
worry you, you can always reverse the hash into a hash of arrays instead:

while (($key, $value) = each %by_key) {
		 push @{$key_list_by_value{$value}}, $key;
		}

=head2 How can I know how many entries are in a hash?

(contributed by brian d foy)

This is very similar to "How do I process an entire hash?", also in
L<perlfaq4>, but a bit simpler in the common cases.

You can use the C<keys()> built-in function in scalar context to find out
have many entries you have in a hash:

my $key_count = keys %hash; # must be scalar context!
	
If you want to find out how many entries have a defined value, that's
a bit different. You have to check each value. A C<grep> is handy:

my $defined_value_count = grep { defined } values %hash;

You can use that same structure to count the entries any way that
you like. If you want the count of the keys with vowels in them,
you just test for that instead:

my $vowel_count = grep { /[aeiou]/ } keys %hash;
	
The C<grep> in scalar context returns the count. If you want the list
of matching items, just use it in list context instead:

my @defined_values = grep { defined } values %hash;

The C<keys()> function also resets the iterator, which means that you may
see strange results if you use this between uses of other hash operators
such as C<each()>.

=head2 How do I sort a hash (optionally by value instead of key)?

(contributed by brian d foy)

To sort a hash, start with the keys. In this example, we give the list of
keys to the sort function which then compares them ASCIIbetically (which
might be affected by your locale settings). The output list has the keys
in ASCIIbetical order. Once we have the keys, we can go through them to
create a report which lists the keys in ASCIIbetical order.

my @keys = sort { $a cmp $b } keys %hash;

foreach my $key ( @keys )
		{
		printf "%-20s %6d\n", $key, $hash{$key};
		}

We could get more fancy in the C<sort()> block though. Instead of
comparing the keys, we can compute a value with them and use that
value as the comparison.

For instance, to make our report order case-insensitive, we use
the C<\L> sequence in a double-quoted string to make everything
lowercase. The C<sort()> block then compares the lowercased
values to determine in which order to put the keys.

my @keys = sort { "\L$a" cmp "\L$b" } keys %hash;

Note: if the computation is expensive or the hash has many elements,
you may want to look at the Schwartzian Transform to cache the
computation results.

If we want to sort by the hash value instead, we use the hash key
to look it up. We still get out a list of keys, but this time they
are ordered by their value.

my @keys = sort { $hash{$a} <=> $hash{$b} } keys %hash;

From there we can get more complex. If the hash values are the same,
we can provide a secondary sort on the hash key.

my @keys = sort {
		$hash{$a} <=> $hash{$b}
			or
		"\L$a" cmp "\L$b"
		} keys %hash;

=head2 How can I always keep my hash sorted?
X<hash tie sort DB_File Tie::IxHash>

You can look into using the C<DB_File> module and C<tie()> using the
C<$DB_BTREE> hash bindings as documented in L<DB_File/"In Memory
Databases">. The C<Tie::IxHash> module from CPAN might also be
instructive. Although this does keep your hash sorted, you might not
like the slow down you suffer from the tie interface. Are you sure you
need to do this? :)

=head2 What's the difference between "delete" and "undef" with hashes?

Hashes contain pairs of scalars: the first is the key, the
second is the value.  The key will be coerced to a string,
although the value can be any kind of scalar: string,
number, or reference.  If a key C<$key> is present in
%hash, C<exists($hash{$key})> will return true.  The value
for a given key can be C<undef>, in which case
C<$hash{$key}> will be C<undef> while C<exists $hash{$key}>
will return true.  This corresponds to (C<$key>, C<undef>)
being in the hash.

Pictures help...  here's the C<%hash> table:

keys  values
	+------+------+
	|  a   |  3   |
	|  x   |  7   |
	|  d   |  0   |
	|  e   |  2   |
	+------+------+

And these conditions hold

$hash{'a'}                       is true
	$hash{'d'}                       is false
	defined $hash{'d'}               is true
	defined $hash{'a'}               is true
	exists $hash{'a'}                is true (Perl 5 only)
	grep ($_ eq 'a', keys %hash)     is true

If you now say

undef $hash{'a'}

your table now reads:

keys  values
	+------+------+
	|  a   | undef|
	|  x   |  7   |
	|  d   |  0   |
	|  e   |  2   |
	+------+------+

and these conditions now hold; changes in caps:

$hash{'a'}                       is FALSE
	$hash{'d'}                       is false
	defined $hash{'d'}               is true
	defined $hash{'a'}               is FALSE
	exists $hash{'a'}                is true (Perl 5 only)
	grep ($_ eq 'a', keys %hash)     is true

Notice the last two: you have an undef value, but a defined key!

Now, consider this:

delete $hash{'a'}

your table now reads:

keys  values
	+------+------+
	|  x   |  7   |
	|  d   |  0   |
	|  e   |  2   |
	+------+------+

and these conditions now hold; changes in caps:

$hash{'a'}                       is false
	$hash{'d'}                       is false
	defined $hash{'d'}               is true
	defined $hash{'a'}               is false
	exists $hash{'a'}                is FALSE (Perl 5 only)
	grep ($_ eq 'a', keys %hash)     is FALSE

See, the whole entry is gone!

=head2 Why don't my tied hashes make the defined/exists distinction?

This depends on the tied hash's implementation of EXISTS().
For example, there isn't the concept of undef with hashes
that are tied to DBM* files. It also means that exists() and
defined() do the same thing with a DBM* file, and what they
end up doing is not what they do with ordinary hashes.

=head2 How do I reset an each() operation part-way through?

(contributed by brian d foy)

You can use the C<keys> or C<values> functions to reset C<each>. To
simply reset the iterator used by C<each> without doing anything else,
use one of them in void context:

keys %hash; # resets iterator, nothing else.
	values %hash; # resets iterator, nothing else.

See the documentation for C<each> in L<perlfunc>.

=head2 How can I get the unique keys from two hashes?

First you extract the keys from the hashes into lists, then solve
the "removing duplicates" problem described above.  For example:

%seen = ();
	for $element (keys(%foo), keys(%bar)) {
		$seen{$element}++;
		}
	@uniq = keys %seen;

Or more succinctly:

@uniq = keys %{{%foo,%bar}};

Or if you really want to save space:

%seen = ();
	while (defined ($key = each %foo)) {
		$seen{$key}++;
	}
	while (defined ($key = each %bar)) {
		$seen{$key}++;
	}
	@uniq = keys %seen;

=head2 How can I store a multidimensional array in a DBM file?

Either stringify the structure yourself (no fun), or else
get the MLDBM (which uses Data::Dumper) module from CPAN and layer
it on top of either DB_File or GDBM_File.

=head2 How can I make my hash remember the order I put elements into it?

Use the C<Tie::IxHash> from CPAN.

use Tie::IxHash;

tie my %myhash, 'Tie::IxHash';

for (my $i=0; $i<20; $i++) {
		$myhash{$i} = 2*$i;
		}

my @keys = keys %myhash;
	# @keys = (0,1,2,3,...)

=head2 Why does passing a subroutine an undefined element in a hash create it?

(contributed by brian d foy)

Are you using a really old version of Perl?

Normally, accessing a hash key's value for a nonexistent key will
I<not> create the key.

my %hash  = ();
	my $value = $hash{ 'foo' };
	print "This won't print\n" if exists $hash{ 'foo' };

Passing C<$hash{ 'foo' }> to a subroutine used to be a special case, though.
Since you could assign directly to C<$_[0]>, Perl had to be ready to
make that assignment so it created the hash key ahead of time:

my_sub( $hash{ 'foo' } );
	print "This will print before 5.004\n" if exists $hash{ 'foo' };

sub my_sub {
		# $_[0] = 'bar'; # create hash key in case you do this
		1;
		}

Since Perl 5.004, however, this situation is a special case and Perl
creates the hash key only when you make the assignment:

my_sub( $hash{ 'foo' } );
	print "This will print, even after 5.004\n" if exists $hash{ 'foo' };

sub my_sub {
		$_[0] = 'bar';
		}

However, if you want the old behavior (and think carefully about that
because it's a weird side effect), you can pass a hash slice instead.
Perl 5.004 didn't make this a special case:

my_sub( @hash{ qw/foo/ } );

=head2 How can I make the Perl equivalent of a C structure/C++ class/hash or array of hashes or arrays?

Usually a hash ref, perhaps like this:

$record = {
		NAME   => "Jason",
		EMPNO  => 132,
		TITLE  => "deputy peon",
		AGE    => 23,
		SALARY => 37_000,
		PALS   => [ "Norbert", "Rhys", "Phineas"],
	};

References are documented in L<perlref> and the upcoming L<perlreftut>.
Examples of complex data structures are given in L<perldsc> and
L<perllol>.  Examples of structures and object-oriented classes are
in L<perltoot>.

=head2 How can I use a reference as a hash key?

(contributed by brian d foy and Ben Morrow)

Hash keys are strings, so you can't really use a reference as the key.
When you try to do that, perl turns the reference into its stringified
form (for instance, C<HASH(0xDEADBEEF)>). From there you can't get
back the reference from the stringified form, at least without doing
some extra work on your own.

Remember that the entry in the hash will still be there even if
the referenced variable  goes out of scope, and that it is entirely
possible for Perl to subsequently allocate a different variable at
the same address. This will mean a new variable might accidentally
be associated with the value for an old.

If you have Perl 5.10 or later, and you just want to store a value
against the reference for lookup later, you can use the core
Hash::Util::Fieldhash module. This will also handle renaming the
keys if you use multiple threads (which causes all variables to be
reallocated at new addresses, changing their stringification), and
garbage-collecting the entries when the referenced variable goes out
of scope.

If you actually need to be able to get a real reference back from
each hash entry, you can use the Tie::RefHash module, which does the
required work for you.

=head1 Data: Misc

=head2 How do I handle binary data correctly?

Perl is binary clean, so it can handle binary data just fine.
On Windows or DOS, however, you have to use C<binmode> for binary
files to avoid conversions for line endings. In general, you should
use C<binmode> any time you want to work with binary data.

Also see L<perlfunc/"binmode"> or L<perlopentut>.

If you're concerned about 8-bit textual data then see L<perllocale>.
If you want to deal with multibyte characters, however, there are
some gotchas.  See the section on Regular Expressions.

=head2 How do I determine whether a scalar is a number/whole/integer/float?

Assuming that you don't care about IEEE notations like "NaN" or
"Infinity", you probably just want to use a regular expression.

if (/\D/)            { print "has nondigits\n" }
	if (/^\d+$/)         { print "is a whole number\n" }
	if (/^-?\d+$/)       { print "is an integer\n" }
	if (/^[+-]?\d+$/)    { print "is a +/- integer\n" }
	if (/^-?\d+\.?\d*$/) { print "is a real number\n" }
	if (/^-?(?:\d+(?:\.\d*)?|\.\d+)$/) { print "is a decimal number\n" }
	if (/^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/)
			{ print "a C float\n" }

There are also some commonly used modules for the task.
L<Scalar::Util> (distributed with 5.8) provides access to perl's
internal function C<looks_like_number> for determining whether a
variable looks like a number.  L<Data::Types> exports functions that
validate data types using both the above and other regular
expressions. Thirdly, there is C<Regexp::Common> which has regular
expressions to match various types of numbers. Those three modules are
available from the CPAN.

If you're on a POSIX system, Perl supports the C<POSIX::strtod>
function.  Its semantics are somewhat cumbersome, so here's a
C<getnum> wrapper function for more convenient access.  This function
takes a string and returns the number it found, or C<undef> for input
that isn't a C float.  The C<is_numeric> function is a front end to
C<getnum> if you just want to say, "Is this a float?"

sub getnum {
		use POSIX qw(strtod);
		my $str = shift;
		$str =~ s/^\s+//;
		$str =~ s/\s+$//;
		$! = 0;
		my($num, $unparsed) = strtod($str);
		if (($str eq '') || ($unparsed != 0) || $!) {
				return undef;
			}
		else {
			return $num;
			}
		}

sub is_numeric { defined getnum($_[0]) }

Or you could check out the L<String::Scanf> module on the CPAN
instead. The C<POSIX> module (part of the standard Perl distribution)
provides the C<strtod> and C<strtol> for converting strings to double
and longs, respectively.

=head2 How do I keep persistent data across program calls?

For some specific applications, you can use one of the DBM modules.
See L<AnyDBM_File>.  More generically, you should consult the C<FreezeThaw>
or C<Storable> modules from CPAN.  Starting from Perl 5.8 C<Storable> is part
of the standard distribution.  Here's one example using C<Storable>'s C<store>
and C<retrieve> functions:

use Storable;
	store(\%hash, "filename");

# later on...
	$href = retrieve("filename");        # by ref
	%hash = %{ retrieve("filename") };   # direct to hash

=head2 How do I print out or copy a recursive data structure?

The C<Data::Dumper> module on CPAN (or the 5.005 release of Perl) is great
for printing out data structures.  The C<Storable> module on CPAN (or the
5.8 release of Perl), provides a function called C<dclone> that recursively
copies its argument.

use Storable qw(dclone);
	$r2 = dclone($r1);

Where C<$r1> can be a reference to any kind of data structure you'd like.
It will be deeply copied.  Because C<dclone> takes and returns references,
you'd have to add extra punctuation if you had a hash of arrays that
you wanted to copy.

%newhash = %{ dclone(\%oldhash) };

=head2 How do I define methods for every class/object?

(contributed by Ben Morrow)

You can use the C<UNIVERSAL> class (see L<UNIVERSAL>). However, please
be very careful to consider the consequences of doing this: adding
methods to every object is very likely to have unintended
consequences. If possible, it would be better to have all your object
inherit from some common base class, or to use an object system like
Moose that supports roles.

=head2 How do I verify a credit card checksum?

Get the C<Business::CreditCard> module from CPAN.

=head2 How do I pack arrays of doubles or floats for XS code?

The arrays.h/arrays.c code in the C<PGPLOT> module on CPAN does just this.
If you're doing a lot of float or double processing, consider using
the C<PDL> module from CPAN instead--it makes number-crunching easy.

See L<http://search.cpan.org/dist/PGPLOT> for the code.

=head1 REVISION

Revision: $Revision$

Date: $Date$

See L<perlfaq> for source control details and availability.

=head1 AUTHOR AND COPYRIGHT

This documentation is free; you can redistribute it and/or modify it
under the same terms as Perl itself.

Irrespective of its distribution, all code examples in this file
are hereby placed into the public domain.  You are permitted and
encouraged to use this code in your own programs for fun
or for profit as you see fit.  A simple comment in the code giving
credit would be courteous but is not required.